highlike

ecoLogicStudio

H.O.R.T.U.S. XL Astaxanthin.g in-human garden

hortus

source:3dprintingindustry.com

ecoLogicStudio, a London-based urban architectural firm, is showcasing its 3D printed “in-human gardens” for the La Fabrique du vivant (The Fabric of the living) exhibition at the Centre Pompidou in Paris.

The two living sculptures, “H.O.R.T.U.S. XL Astaxanthin.g” and “XenoDerma” were created in collaboration with the studio’s research partners: the Urban Morphogenesis Lab at University College London (UCL); the Synthetic Landscape Lab at University of Innsbruck in Austria, and the Wasp Hub at the University of Southern Denmark (SDU).

La Fabrique du Vivant exhibition, which runs until April 15th, is part of a new event called Mutations-Créations. This series aims to retrace the archaeology of the living and of artificial life with new technologies, i.e., 3D printing. The event is curated by Marie-Ange Brayer, head of the Design and Industrial Prospective Department at Centre Pompidou and Olivier Zeitoun.

The curators explained that “in the digital era, a new interaction is emerging between creation and the fields of life science, neuroscience, and synthetic biology.” Thus, the sculptures featured convey the “notion of living” within an artificial environment.

A digital algorithm was used to simulate the growth of a substratum, an underlying layer particularly of rock or soil, as well as coral morphology. Using large-scale 3D printers, layers of 400 microns, supported by triangular units of 46mm were printed and divided into hexagonal blocks of 18.5cm. Cyanobacteria were then injected on a biogel medium into the individual triangular cells.
.
.
.
.
.
.
.
source:ecologicstudiocom

H.O.R.T.U.S. XL Astaxanthin.g is a large scale, high-resolution 3D printed bio-sculpture receptive to both human and non-human life. The project is conceived by Claudia Pasquero and Marco Poletto (ecoLogicStudio) and developed in collaboration with the Synthetic Landscape Lab at the University of Innsbruck.

In the digital era a new interaction is emerging between creativity and the fields of life science, neuroscience and synthetic biology. The notion of “living” takes on a new form of artificiality. This project confronts the dictates of human rationality with the effects of proximity to bio-artificial intelligence. It is developed in “collaboration” with living organisms. Their non-human agency is mediated by spatial substructures we have developed while studying biological models of endosymbiosis.

With a digital algorithm we can simulate the growth of a substratum inspired by collective coral morphogenesis. This is physically deposited by 3D printing machines in layers of 400 microns, supported by triangular cells of 46 mm and divided in hexagonal blocks of 18.5 cm. Photosynthetic cyanobacteria are inoculated on a biogel medium into the individual triangular cells, or bio-pixel, forming the units of biological intelligence of the system.

Their metabolisms, powered by photosynthesis, convert radiation into actual oxygen and biomass. The density-value of each bio-pixel is digitally computed in order to optimally arrange the photosynthetic organisms along iso-surfaces of increased incoming radiation. Among the oldest organisms on Earth, cyanobacteria’s unique biological intelligence is therefore gathered as part of a new form of bio-digital architecture.

Centre Pompidou, Mutations/Creations

Design:
ecoLogicStudio (Claudia Pasquero, Marco Poletto, Konstantinos Alexopoulos, Matteo Baldissara, Michael Brewster)

Research partner for biological as well as 3d printed systems and production development:
Synthetic Landscape Lab, IOUD, Innsbruck University (Prof. Claudia Pasquero, Maria Kuptsova, Terezia Greskova, Emiliano Rando, Jens Burkart, Niko Jabadari, Simon Posch);

Research partner for 3d printed systems and production development:
CREATE Group / WASP Hub Denmark – University of Southern Denmark (SDU) (Prof. Roberto Naboni, Furio Magaraggia)

Engineering:
YIP structural engineering, Manja Van De Worp

Microalgal Medium Material Support:
Ecoduna AG

3D printing Material Support:
Extrudr
.
.
.
.
.
.
.
source:dearchitectsensecom

ecoLogicStudioClaudia PasqueroMarco PolettoUCLCREATE Gruppe / WASP HubLa Fabrique du vivant2019220-415Marie-Ange BrayerOlivier ZeitounMutations-Crations

Traceback (most recent call last):, File “/data/www/trancld_client/data/trans/gtrans.py”, line 13, in , to_lang = sys.argv[3],IndexError: list index out of range

Claudia Pasquero und Marco Poletto, Gründer von ecoLogicStudio (www.ecologicstudio.com) Und ihre Forschungspartner: das Urban Morphogenese Lab an der Bartlett UCL, der Synthetic Landschaft Lab an der Universität Innsbruck und der CREATE Gruppe / WASP Hub Dänemark an der University of Southern Denmark, werden in der Ausstellung La Fabrique du vivant [Der Stoff teilnehmen der lebenden] im Centre Pompidou in Paris (20. Februar 15. April 2019) .Die Show, Teil Mutations-Crations Serie und kuratiert von Marie-Ange Brayer mit Olivier Zeitoun, zeichnet die Archäologie des Lebens und des künstlichen Lebens.

Da die Kuratoren im digitalen Zeitalter behaupten, eine neue Interaktion entsteht zwischen Schöpfung und den Bereichen Life Science, Neurowissenschaften und der Synthetischen Biologie. Der Begriff des Lebens nimmt eine neue Form von Künstlichkeit, die die gesamte Urbansphere des globale Apparat der zeitgenössischen Urbanität durchdringt. Hier ist die Miniaturisierung, die Verteilung und die Intelligenz von Menschen verursachte städtische Netzwerke haben im menschlichen Komplexität erreicht, sich entwickelnden Prozesse von synthetischen Lebens auf der Erde Engendering.

In diesem Zusammenhang ist ein multidisziplinäres Team unter der Leitung von Architekten Claudia Pasquero und Marco Poletto hat im menschlichen Gärten geschaffen, zwei 3D gedruckt lebenden Skulpturen empfänglich für menschliches und nicht-menschliches Leben. Diese Stücke stellen die Säulen der menschlichen Vernunft mit den Auswirkungen der Nähe zu bio-künstliche Intelligenz. Beide Skulpturen wurden in Zusammenarbeit mit lebenden Organismen, insbesondere Kolonien von Cyanobakterien Photosynthese, H.O.R.T.U.S. entwickelt XL Astaxanthin.g, und ein Kollektiv von asiatischen Fawn Taranteln, XenoDerma. Ihre nicht-menschliche Agentur wird durch räumliche Unterbauten von den Künstlern entwickelt vermittelt, während der biologischen Modelle von endosymbiosis studieren. Diese Strukturen werden algorithmisch entwickelt und produziert mit Hilfe von großen, hochauflösenden 3D-Druck technology.Both skulpturale Stücke vorgesehen sind spekulativ 1: 1-Maßstab Prototypen von lebenden Architekturen, eine neue Generation von dicken biophilic architektonischen Häuten empfänglich für das urbane Leben .

In H.O.R.T.U.S. XL Astaxanthin.g, ein digitaler Algorithmus simuliert das Wachstum eines Substrat durch Korallen Morphologie inspiriert. Dies wird physikalisch durch 3D-Druckmaschinen in Schichten von 400 um abgeschieden, unterstützt von dreieckigen Einheiten von 46 mm und unterteilt in hexagonal Blöcke von 18,5 cm. Photosynthetic Cyanobakterien wird auf einem Biogel Medium in die einzelnen dreieckförmigen Zellen beimpft, oder Bio-Pixel, die Einheiten der biologischen Intelligenz des Systems bildet. Ihr Stoffwechsel, angetrieben durch Photosynthese wandeln Strahlung in tatsächlichen Sauerstoff und Biomasse. Die Dichte-Wert eines jeden Pixels bio-digital berechnet, um optimal die photosynthetische Organismen entlang Isoflächen erhöhter eintreffende Strahlung ordnen. Zu den ältesten Organismen auf der Erde, Cyanobakterien einzigartige biologische Intelligenz wird als Teil einer neuen Form von Bio-digitale Architektur gesammelt.
.
.
.
.
.
.
.
source:goooodcn

ecoLogicStudio的创始人Claudia Pasquero和Marco Poletto近期与UCL建筑学院的城市形态实验室、因斯布鲁克大学的人造景观实验室以及南丹麦大学的CREATE Group / WASP Hub进行合作,共同参与了巴黎蓬皮杜艺术中心举办的“La Fabrique du vivant”(有生命的织物)展览(2019年2月20日-4月15日)。本次展览是由Marie-Ange Brayer和Olivier Zeitoun共同策划的Mutations-Créations系列展览中的一部分,旨在对生命体和人工生命进行追溯。

如策展人所言,在当下的数字时代,人造物与生命科学、神经科学以及合成生物学等领域之间正不断形成新的互动。“生命”的概念开始以一种人工形式展现出来,并逐渐渗透到全球的都市生活当中。人造城市网络不断趋于微型化和智能化,乃至达到了一种非人性所及的复杂性。

在这一背景下,由建筑师Claudia Pasquero和Marco Poletto领导的多学科团队共同创作了名为“非-人类花园”的3D打印雕塑作品,探讨了人类生命与非人类生命的关系。这项作品分为两部分,其一是由蓝藻细菌群落构成的“H.O.R.T.U.S. XL Astaxanthin.g”,其二是基于亚洲狼蛛的生活习性而构建的“XenoDerma”。艺术家在研究内共生生物模型时开发出了不同的基础空间结构,能够对它们的非人类行为形成干预。这两件作品均可以看作是比例为1:1的生物建筑原型,或者说是一种可以适应城市生活的“亲生物建筑表皮”(biophilic architectural skins)。

H.O.R.T.U.S. XL Astaxanthin.g以珊瑚的形态为灵感,利用数字算法对生物基质的生长进行了模拟。该作品由3D打印机以400微米的图层单位生产出来,并通过46毫米的三角形单元结构进行支撑,形成一系列边长为18.5厘米的六边形图块。光合蓝藻细菌通过生物凝胶培养基接种在三角形的单元(或者说生物像素)上,共同构成一个智能的生物系统。它们的代谢由光合作用驱动,能够将光照转化为氧气和生物质能。每个生物像素的密度值均通过数字计算,为的是对光合生物进行最优化的排列,使其沿着构造表面不断生长。